193 pur-si solar www.vishay.com vishay bccomponents revision: 13-mar-15 1 document number: 28407 for technical questions, contact: aluminumcaps2@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 aluminum capacitors power ultra high ripple current snap-in for solar fig. 1 features ? long useful life: 6000 h at +105 c ? specified for 500 v, 50 c operation ? high ripple current capability ? high reliability ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 applications ? solar pv inverters ? industrial motor control ? power supply marking the capacitors are marked (where possible) with the following information: ? rated capacitance (in f) ? tolerance code on rated capacitance, code letter in accordance with iec 60062 ( 20 %) ? rated voltage (in v) ? two digit date code, in accordance with iec 60062 ? name of manufacturer ? code for factory of origin ? - sign to identify the nega tive terminal, visible from the top and side of the capacitor ? code number ? climatic category in accordance with iec 60068 ? ll for long life grade quick reference data description value nominal case size ? (d x l in mm) 35 x 30 to 35 x 60 rated capacitance range, c r 220 f to 560 f tolerance on c r 20 % rated voltage, u r 500 v rated temperature ra nge -40 c to +50 c category voltage, u c 450 v category temperature range -40 c to +105 c useful life at u c , 105 c, ? i r applied 6000 h endurance at u r , 50 c, ? no ripple applied 5000 h shelf life at 0 v, 105 c 1000 h based on sectional speci fication iec 60384-4/en130300 climatic category iec 60068 40/105/56 max. rms value of ripple voltage 12 v 159 pul- s i (500 v) 19 3 pur- s i s olar 096 pll-4t s i higher temperature 85 c 4-terminal selection chart for c r , u r , and relevant nominal case sizes (? d x l in mm) c r (f) u r (v) 500 220 35 x 30 - - - - 330 - 35 x 40 - - - 390 - - 35 x 45 - - 470 - - - 35 x 50 - 560 - - - - 35 x 60
193 pur-si solar www.vishay.com vishay bccomponents revision: 13-mar-15 2 document number: 28407 for technical questions, contact: aluminumcaps2@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in millimeters and available forms two terminal snap-in fig. 2 - two terminal snap-i n fig. 3 - mountin g hole diagram table 1 note ? other case sizes, terminations and capacitance values available on request. note ? unless otherwise specified, all electrical values in table 2 apply at t amb = 20 c, p = 86 kpa to 106 kpa, rh = 45 % to 75 %. ordering example electrolytic capacitors 470 f/500 v nominal case size: ? 35 mm x 50 mm ordering code: mal219390104e3 table 2 note (1) at u max. ? u c ? d l + 2 max. l bottom view 5.8 mm + 0 - 1 + terminal - terminal the minu s terminal can be marked with a black dot or with an imprinted - s ign. 10 0.1 ? 2 0.1 (2 x) dimensions in millimeters, mass and packaging quantities nominal case size ? d max. l max. mass (g) packaging quantities (unit per box) cardboard box dimensions l x w x h 35 x 30 36 32 40 50 390 x 198 x 44 35 x 40 36 42 56 50 390 x 198 x 54 35 x 45 36 47 64 50 390 x 198 x 59 35 x 50 36 52 72 50 390 x 198 x 64 35 x 60 36 62 88 50 390 x 198 x 74 electrical data symbol description c r rated capacitance at 100 hz i r rated rms ripple current at 100 hz and 105 c i l1 max. leakage current after 1 min at u r esr max. equivalent series resistance at 100 hz z max. impedance at 10 khz electrical data and ordering information u r (v) u c (v) c r (f) case size ? d x l (mm) i r 100 hz 105 c (a) (1) i l 1 min (ma) esr 100 hz max. (m ? ) z 10 khz max. (m ? ) ordering code 500 450 220 35 x 30 1.35 0.6 900 600 mal219390101e3 330 35 x 40 1.74 0.9 600 400 mal219390102e3 390 35 x 45 1.94 1.1 500 350 mal219390103e3 470 35 x 50 2.18 1.3 450 300 mal219390104e3 560 35 x 60 2.52 1.5 350 250 mal219390105e3
193 pur-si solar www.vishay.com vishay bccomponents revision: 13-mar-15 3 document number: 28407 for technical questions, contact: aluminumcaps2@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 table 3 table 4 additional electrical data parameter conditions value voltage surge voltage u s = 1.1 x u c reverse voltage u rev ? 1 v rms value of ripple voltage u rpl ? 12 v current leakage current after 1 min at u r i l1 ? 0.006 c r x u c after 5 min at u r i l5 ? 0.002 c r x u c inductance equivalent series inductance (esl) all case sizes ca. 20 nh multiplier of ripple current (i r ) as a function of frequency frequency (hz) i r multiplier 50 0.80 100 1.00 200 1.20 400 1.30 1000 1.40 10 000 1.50 test procedures and requirements test procedure (quick reference) requirements name of test reference endurance iec 60384-4/ ? en130301 ? subclause 4.13 t amb = 50 c; u r = 500 v applied; ? 5000 h ? c/c: 15 % esr ? 1.5 x spec. limit z ? 2 x spec. limit i l5 ? spec. limit useful life en130301 ? subclause 1.8.1 t amb = 105 c; u c and i r applied; ? 6000 h ? c/c: 30 % esr ? 3 x spec. limit z ? 3 x spec. limit i l5 ? spec. limit no short or open circuit, ? no visible damage total failure percentage ? 1 % shelf life ? (storage at ? high temperature) iec 60384-4/ ? en130300 ? subclause 4.17 t amb = 105 c; no voltage applied; ? 1000 h after test: u c to be applie d for 30 min, ? 24 h to 48 h befo re measurement ? c/c: 15 % esr ? 1.5 x spec. limit i l5 ? 2 x spec. limit
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
